Moving Your Child's Swing Set To Your New Home

17 June 2016
 Categories: , Blog


If you are moving to a new home and you are planning on bringing a swing set along, you will want to take the necessary steps to prepare the pieces for the ride so they do not become damaged should they jostle around inside the vehicle. Moving a swing set is a fairly easy job if you do some preparation instead of rushing through disassembly and packaging. Here are some tips you can use to make sure your child's swing set makes the trip without becoming damaged while in transit.

Take Photographs Of The Swing Set Before Taking It Apart

Grab your camera or cell phone and take photos of your child's swing set while it is still intact. This will help you put the pieces together properly when you wish to set it up on your new property. It is also a good idea to have photographic evidence of the condition of the swing set if you plan on hiring a moving service to make the haul. This way, if there is damage to one of the pieces from the ride, you may be reimbursed so you can get new pieces for the set instead of scrapping it upon arrival at your new home.

Label The Parts Of The Swing Set To Make Reassembly Easier

Before taking the swing set apart, add pieces of masking tape to each piece. Draw a diagram of the swing set and number each piece. Add the corresponding numbers to the pieces of masking tape. This will make it easier for you to put the swing set back together if you cannot find the original manual. If you wish to have a manual available, contact the manufacturer before the move so it is handy for when you get to your new property.

Take Apart The Swing Set And Package Pieces Appropriately

Spray a rust removing solvent on any bolts and leave in place for a few minutes before trying to remove them from the frame. Take down any swings and wrap them along with the chains or cords inside a blanket. This can then be placed in a cardboard box. Remove the hardware from the frame and place in a small plastic sandwich bag. Label it "swing set" and place it in the box with the swings before taping the box shut. Each wooden, metal, or plastic swing set beam should be wrapped individually with bubble wrap. Afterward, wrap each bubble-wrapped piece inside a blanket.or furniture bag for added protection.

For more assistance with household movers, contact companies like Wheaton World Wide Moving.


Share